Barco DB-220, Руководство по установке

Страница: 53 / 87

4. Physical installation of the DB-220 Display
4.8 Mounting the telescopic camera arm
The telescopic camera arm can be mounted at the left bottom corner or at the right bottom corner of the
DB-220 display. The illustrations in this procedure show how to install the camera in the left bottom corner of
the DB-220 display as seen from the front of the display. Note that the camera is optional.
Necessary tools
• 9/16” open-end wrench.
• 9/16” box-end wrench.
• 15/32” open-end wrench.
• 15/32” box-end wrench.
• 3/8” open-end wrench.
• 3/8” box-end wrench.
• 7/32” open-end wrench.
• 7/32” box-end wrench.
• 3/16” Allen wrench.
Necessary parts
• Seventeen bolts 5/16” x 1” UNC, type DIN 933 (reference A)
• Eight bolts 5/16” x 3/2” UNC, type DIN 933 (reference B)
• Two bolts 5/32” x 1/2” UNC, type DIN 912, 8.8 (reference C)
• One bolt 3/8” x 1” UNC, type DIN 933 (reference D)
• Two bolts No. 12 x 1” UNC, (reference E)
• Four plane washers D8.4 D16, type DIN 125A (reference F)
• Four plane washers D6.4 D12, type DIN 125A (reference G)
• Four plane washers D4.3 D9, type DIN 125A (reference H)
• Two plane washers D10.5 D20, type DIN 125A (reference I)
• Five lock washers D8.1 D14.8, type DIN 127B (reference J)
• Two lock washers D6.1 D11, type DIN 127B (reference K)
• Two lock washers D4.1 D7.6, type DIN 127B (reference L)
• One lock washer D10 2D18, type DIN 127B (reference M)
• One nut 3/8” UNC, type DIN 934 (reference N)
• Two nuts No.12 UNC (reference O)
• Two nuts 5/32” UNC, type DIN 934 (reference P)
How to mount the telescopic camera arm?
1. Install the corner bracket with the sleeve, which supports the camera arm, as illustrated. Fasten the bracket with four bolts (A)
and provide each bolt with a lock washer (J) and a plane washer (F).
A
J
F
Image 4-38
2. Insert the camera arm (Z1) into the sleeve and align the hole (B) in the camera arm with the hole (A) in the sleeve.
R59770240 DB-220 11/06/2009 49