Barco DB-220, Руководство по установке

Страница: 48 / 87

4. Physical installation of the DB-220 Display
4.6 Mounting the DB-220 display upon the support structure
This procedure describes how to mount the DB-220 display upon the support structure which consists of 3
vertical I-beams.
Necessary tools
• Adapted tools to lift the DB-220 display.
• 15/16” open-end wrench.
Necessary parts
• Two supplied (non standard) bolts (reference D).
• Two supplied (non standard) washers (reference E).
How to mount the DB-220 display upon the support structure?
1. Loosen the nuts (A) of all the clamps as illustrated.
Warning: It’s suf fi cient to loosen these nuts until the end of the bolt.
2. Loosen the nuts (B) to release the correction plates (C) as illustrated.
C
A
C
B
Image 4-31
3. Lift the DB-220 display in front of the support structure.
Warning: Wear a safety hat while assisting at the lifting and moving of the DB-220 display.
Tip: If necessary, reposition the clamps in order to make the distance between them bigger than the width of the I-beam.
44 R59770240 DB-220 11/06/2009