Barco CX-50 Gen2, Руководство по установке

Страница: 112 / 144

R5900120 /01 CX-50 Gen2 112
The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.
2. Fill out Passphrase.
The key used in WPA2-PSK to authenticate onto the wireless infrastructure. This can be a string of 64
hexadecimal digits or a passphrase of 8 to 63 printable ASCII characters.
3. Click Save changes to save the settings.
6.36 Blackboard
About Blackboard
Saving information from a blackboard can be enabled or disabled. When enabled, the information is saved on
hard disk of all connected Buttons, connected ClickShare apps and on the USB sticks connected with the
Base Unit.
How to change the blackboard setting
1. Log in to the Configurator .
2. Click System → Blackboard .
Image 6–55 Save annotations
3. To enable or disable Blackboarding check or uncheck the checkbox in front of enable or disable.
Checked: blackboarding enabled
Unchecked: blackboarding disabled.
4. Check or uncheck the check box in front of Allow saving annotations to connected clients and USB sticks .
Checked: annotations on the blackboard can be saved.
Unchecked: no annotations on the blackboard can be saved.
6.37 XMS Cloud Integration
Overview
When your device is not registered and connected to the cloud service, the following message will be
displayed: Device has not been added to XMS cloud. To add your device to XMS cloud click here https://xms.
barco.com/add.
The device token is given and can be copied.
CX-50 Gen2 Configurator