Barco CX-20, Руководство по установке

Страница: 88 / 102

R5900102 /02 CX-20 88
9. Click Save changes to apply.
6.22 Date & Time setup, time server
About using NTP server
The clock is continuously synchronized with an external time server and the deviation is in the order of
milliseconds. Extra time servers can be added.
As long as there is no synchronization with a time server the status is indicated as disabled.
How to setup
1. Log in to the Configurator .
2. Click System → Date & Time .
Image 6 – 35 Time server setup
The current time is indicated next to Current time .
3. Check the radio button next Use NTP .
4. Enter a NTP server address next to NTP servers . Enter the IP address or server name.
Note: Multiple servers (maximum 5) can be added, separated by a comma.
5. Click Save changes to apply.
A synchronization with the NTP server takes place. The status field indicates the progress.
6.23 Energy savers
About standby
Standby after (minutes) : If there is no client connection detected during the standby timeout period, the Base
Unit will enter the selected standby mode.
Default setting: Time to standby: 10 min, the Base Unit will enter the Eco standby mode.
Eco mode
When the Base Unit enters ECO standby mode, it will disable the HDMI output signal. The Base Unit's LEDs
will be breathing white to indicate the ECO standby mode.
CX-20 Configurator