![background image](http://html1.mh-extra.com/html/barco/cine-6/cine-6_owners-manual_473928041.webp)
Random Access Adjustment Mode
6-18 ____________________________________________________________________________ R5976381 BARCO CINE6 31012002
Convergence Adjustment
Convergence adjustments affect both the horizontal and
vertical lines of the setup pattern. These adjustments are
performed on the red image while superimposed on the green
image and then on the blue image while superimposed on the
green image.
Note : the green convergence adjustments can be added as
an option. When these are available, start always with 'green
only'. This option will also be indicated on the convergence
menu.
Highlight first 'Green only' when available by pushing the
arrow keys up or down and press ENTER to display the
convergence adjustment menu.
The screen area is divided into 13 areas.
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE
Select with or
then <ENTER>
<EXIT> to return.
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
9
8
5
4
1
2
3
6
10
12
7
11
13
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
CONVERGENCE
SEL : select area
using
arrow keys
ADJ : adjust area
using
arrow keys
Toggle between
SEL and ADJ
with <ENTER>
<ENTER> continue
<EXIT> to return
CONVERGE
ADJUSTMENT
70
Use the arrow keys to move the box to the desired zone and
then press
ENTER
to begin the convergence adjustment.
Start the convergence adjustment with zone one and con-
tinue as mentioned in the diagram hereafter.
Use the arrow keys to make horizontal or vertical conver-
gence adjustments in the selected zone and then press
ENTER
to move the box to another zone or
EXIT
to return to
the Convergence menu.
ENTER
toggles the arrow keys between zone se-
lection and zone adjustment .
EXIT
returns to convergence menu
red image
green image