![background image](http://html1.mh-extra.com/html/barco/cine-6/cine-6_owners-manual_473928031.webp)
Random Access Adjustment Mode
6-8
____________________________________________________________________________ R5976381 BARCO CINE6 31012002
COLOR BALANCE
FIXED COLOR BALANCE
3200 5400 6500 9300
CUSTOM WHITE BALANCE
RED & BLUE GREEN
CUSTOM BLACK BALANCE
RED & BLUE GREEN
Select with arrow keys,
then <ENTER>,
you can adjust red with or
and blue with or
Custom Color Balance :
Select Custom White balance with the arrow keys and press
ENTER
to start the
adjustment.
Use the up and down arrow keys to adjust the RED gain or the left and right arrow
keys to adjust the BLUE gain.
A bar scale indicates the amount of adjustment. Same for GREEN.
Select Custom Black balance with the arrow keys and press
ENTER
to start the
adjustment.
Use the up and down arrow keys for RED or left and right arrow keys for the BLUE
cutoff. Same for Green.
When the color balance is adjusted, press
EXIT
to return to the
PICTURE TUNING
menu.
Color Balance
The Color Balance function is used to select or adjust the color temperature of
white used by the projector.
The color balance can be adjusted in two different ways :
-
fixed color balance. You have the choice between 3200K (red),
5400K, 6500K (white), or 9300K (blue).
-
custom white and black balance.
Fixed Color Balance :
Highlight one of the 4 preprogrammed values with the arrow keys and
press
ENTER
to apply.
Select with
or
PICTURE TUNING
COLOR BALANCE
GAMMA
DECODING : EBU
PORT 2 : S - VIDEO
LINE MULTIPLIER
<ENTER> to accept
<EXIT> to return
menu 1
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
LINE MULTIPLIER
TIME BASE CORRECTION
LUMINANCE DELAY
V SYNC REF : INDIRECT
CLAMP GATING : OFF
LIMO PLUS OPTIONS
FACTORY PRESET
WARNING : ADVANCED
ADJUSTMENT SHOULD BE
PERFORMED ONLY BY QUALIFIED
PERSONNEL
Factory Preset
What can be done ?
All settings for the line multiplier can be set to factory preset settings.
What are the factory preset settings ?
The factory preset settings are :
Time base correction : on
Luminance delay : 0
Vertical sync reference : indirect
Clamp gating : off
How to activate ?
1.
Push the cursor key
é
or
ê
to select 'Factory Preset' (menu 1).
2.
Press
ENTER
to activate.