![background image](http://html1.mh-extra.com/html/barco/bg9300/bg9300_installation-manual_473920024.webp)
- 24 -
Electrical connection of the LCD Panels and Starting up
of the Projector
Electrical
Connection of the
Panels
Before closing the projector, the LCD panels must be electrically connected to the driver
board using the ribbon cables. Follow the next procedure :
Step
Action
1
Push the ribboncable into the
connector.
2
Press very carefully on both sides of
the indicated points to lock the ribbon
cable into the connector.
Illustration
How to Close the
Top Cover
The top cover has to be closed before starting up the projector. Continue with the
following steps :
Step
Action
1
Turn the cover until the closed position is reached.
2
Turn both lock screws on each side of the front top cover with a screwdriver
or a coin counter clockwise.
To be continued on next page
Antistatic
Protection Steps
Wear a wrist band which is connected to the ground while handling the static sensitive
parts.
Location of the
LCD Panels
Blue panel
Red panel
Green panel
Ribbon Connectors
Ribbon Connectors
Ribbon Connectors
Press to lock
Press to unlock
Connector
ribbon
connector
cable