![background image](http://html1.mh-extra.com/html/barco/bg9300/bg9300_installation-manual_473920016.webp)
- 16 -
Assembling the LCD Holder
How to fix the
LCD Panel
The LCD panel is mounted with 3 screws on the LCD holder. Continue with the
following steps:
Antistatic
Protection Steps
Wear a wrist band which is connected to the ground while handling the static sensitive
parts.
Attention !
LCD panels are very sensitive devices. Observe full precautions for handling electro-
static devices. Do not touch the glass surface and the anti-reflective coating. Hold only
by the surrounding metal plate.
Necessary Tool
The following tool is necessary to fix the panel to the holder :
·
Philips head screw driver. Flat head screw driver, nutdriver 7 mm.
Action
Take all precaution not to damage the panel.
Guiding the cable through the ribbon slot in the LCD
holder.
Turn in the 3 screws retaining the panel to the LCD
holder
Should you require to attach the
Panel Holder and
Mounting Unit
(for example after changing between Off/
On Axis) then do the following;
Loosen the 2 Panel Support screws, it is not necessary to
completely release the screws, just sufficiently to produce
enough adequate slack.
Bring the two bodies (the mounting unit & LCD panel
holder) together allowing the ball and socket joint
arrangements to rest against each other. Tighten the
panel support screws one at a time starting on the side
with the circular ball socket joint. While tightening ensure
the pinching spring is locking onto the LCD Panel Holder.
Once this side is done tighten the other side which has
the elongated socket joint. Ensure both Pinching Springs
are holding the Panel securely.
Step
1
2
3
On/Off
Axis
Image
1,2
3,3a
4