Random access adjustment mode
5 - 36
5976419 BARON 908 04122001
Driver voltage (optional)
When available ?
Only available as an option.
What can be done ?
The voltage for the convergence and focus outputs that is tracked with the line frequency, can be extra turned up or down depending
on the projected image. This voltage should be kept as low as possible to avoid extra dissipation inside the projector.
Start up
1. Push the cursor key
é
or
ê
to highlight 'Driver Voltage' (menu 1).
2. Press
ENTER
to select.
3. Use the cursor keys to change the driver voltage (menu 2).
If it was not possible to perfectly adjust the convergence (hooking), drive up the voltage a little and try again to converge the
image. Repeat this step if necessary. Do not exaggerate as the dissipation inside the projector will increase too.
If the image is perfectly converged (no hooking), turn back the driver voltage until there is just no distortion visible on the screen
(inside the projector the dissipation will be reduced.
menu 1
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
SOFT EDGE
DRIVER VOLTAGE
VOLTAGE
OUTPUT DRIVERS
Max
Содержание Baron 908 R9040060
