Barco Baron 908 R9040060, Руководство пользователя

Страница: 19 / 100

Connections
2 - 3 5976419 BARON 908 15032003
RGB Analog source to port 3
Which signal to port 3 ?
Connect your RGB source with sync on green, composite or separate sync via an interface to Port 3.
Always use an interface (e.g. Barco Magik Interface R9828120) when a computer and local monitor have to be connected to the
projector as the signal cable coming from the computer is limited to 60 cm due to interferences.
The RGB analog input accepts only sources with a horizontal frequency of 32 kHz and higher.
The Baron is installed with a d Limo Pro to connect a source with a horizontal frequency lower than 32 kHz.
Pin configuration D9 connector of the analog input.
1 Not connected 4 GREEN 7 Ground RGBS
2 Ground RGBS 5 BLUE 8 Hor/comp. sync
3 RED 6 Ground RGBS 9 Vert. sync
Input selection port 3
With the RCU, press digit button 3
RGB Analog source with composite sync to port 4/5
Which signal to port 4/5 ?
RGB analog input terminals with separate H and V sync inputs, composite sync input or with sync on green (BNC terminals). The
projector detects automatically where the sync signal is located.
Always use an interface (e.g. Barco Magik Interface R9828120) when a computer and local monitor have to be connected to the
projector as the signal cable coming from the computer is limited to 60 cm due to interferences.
The RGB analog input accepts only sources with a horizontal frequency of 32 kHz and higher.
The Baron is installed with a d Limo Pro to connect a source with a horizontal frequency lower than 32 kHz.
RGBS or RGsB input selection
With the RCU, press digit button 4 or 5.
4 when sync on green.
5 when separate sync
Computer
Port on projector
Magik Interface
(R9828120)
to computer
to monitor
PORT 3
image 2.8
Port 3
Computer
Port on projector
Magik Interface
(R9828120)
to computer
to monitor
R G B
Comp / H-Sync V-Sync
PORT 4 / 5
image 2.9
Port 4/5