2-1
Hardware Set Up
5975119 BARCODATA 3300 121098
2
How to activate the password function?
1
On
Off
HARDWARE SET UP
The password function can be hardware set with a DIP switch on
the CPU module. To change the position of this DIP switch, it is
necessary to open first the top cover.
Gaining access to the DIP switch
Power down the projector and unplug the power cord from the wall
outlet.
Turn both lock screws with a screwdriver or coin counter
clockwise.
Lift up and pivot the top cover. Attention : the cover is not secured
with an incorporated support. When opening, turn it over slowly.
The processor module with the DIP switches is located on the front
side.
Loosen the locking
screws.
Open the top cover
When DIP switch 1 is in the :
- ON position, password is activated.
-OFF position, password not activated, service mode
is free accessible.
