2-4
Installation Mode
5975129 BARCODATA 3300 TCR
P
LUS
121098
l. Due to interaction, turning on screw 4, 5 and 6 can influence the
focus of the image. If necessary, repeat procedure from step b. .
Red on green convergence.
Push the control disc up or down to highlight
Red on green
and press
ENTER
to display the Red on green test pattern.
Repeat the same procedure as for Blue on green lines but read red
when blue is indicated.
To check the result of the convergence adjustments, highlight
Hatch
and press
ENTER
. A hatch pattern will be displayed on the screen.
ENTER
: displays a hatch pattern.
EXIT
: returns to the service menu.
All lines must be displayed in white, if not so repeat the convergence
adjustment procedure.
How to use the built-in adjustable lensholder.
With the lensholder, it is possible to shift the displayed image up or
down on the screen without moving the projector from its normal
positioin and without any geometric picture distortion. This built-in
feature is particularly useful for use in dual projector configurations or
for applications when the projector cannot be installed in its standard
position.
Features :
- Vertical and horizontal shift of the lens without removing the top
cover,
5 mm left and 5 mm right
15 mm up and 15 mm down.
- Makes it possible to project a geometric non-distored image from a
non-standard position.
- The shift of the lensholder is not determined by the lens but depends
on the screen width.
- Can be used with all available lenses.
Lens shift up/down
Lens shift left/right
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
