Service Mode
7-9
5975708 BARCODATA 1209s 050698
Select with or
then <ENTER>
<EXIT> to return.
SERVICE MODE
DYNAMIC ASTIGMATISM
G2 ADJUSTMENT
GAMMA CORRECTIONS
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
MEMORY BANKS : ON
MORE...
Memory banks
The user has the possibility to create 8 different memory banks for
each source. But, the maximum allowed quantity of menory banks
for all sources together is 32.
The option to create different memory banks for the same source can
be switched ON or OFF.
Highlight
Memory Banks
and press
ENTER
to toggle between ON and
OFF.
ON : different memory banks available.
OFF : only one memory bank available.
If different memory banks are available for a source and the memory
bank option is toggled to OFF, only the first memory bank will be used
to display the source.
How to create a new memory bank ?
- Select your source. The projector selects the last used memory
bank.
- Press ENTER and push the corresponding digit (between 1 and 8)
of a non existing memory bank. (The memory banks can be created
in random order, e.g. first creating bank 5 and later bank 2.)
- Make the necessary adjustments. When leaving the source, the
new created memory bank will be saved for later use.
Example : When source 1, video 15.6 kHz /60Hz is create on bank 4
and the vertical frequency changes to 50Hz, the projector will create
a new block (due to the vertical frequency change) with the same
bank number 4.
How to recall a specific memorybank for the actual source ?
When the memory bank option is ON and a source is selected, this
source will be displayed with the last used memory bank settings.
An on-screen menu will give a indication of the memory bank nummer
used. To switch to another memory bank :
- Press ENTER to select the next memory bank in increasing order.
or
- Enter the number of the desired memory bank with the digit keys.
In both cases, the on-screen indication will be update.
Source xx
Memory bank
4
