Service Mode
7-3
5975708 BARCODATA 1209s 050698
Select with or
then <ENTER>
<EXIT> to return.
Select with or
<ENTER> to copy
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
Deletion of all blocks
Highlight
'delete all blocks'
with the control disc and press
ENTER
.
ENTER
gives a confirmation message before deleting.
If you are certain you wish to delete all blocks, press
ENTER
to
confirm, otherwise press
EXIT
to return.
Once
ENTER
is pressed, all block headers and adjustment settings
are permanently removed and cannot be restored.
Deletion of blocks
This item is password protected.
The delete function is used to clear all data (settings) from an
adjustment block.
A delete can be given :
- block by block
or
- for all blocks.
Deleting block by block
The delete a block function deletes the settings of a selected block.
Highlight
'Delete a block'
with the control disc and press
ENTER
.
Push the control disc up or down to select the desired adjustment
block. Press
ENTER
to delete the selected adjustment block. A
confirmation menu will be displayed.
ENTER
will delete the selected block.
EXIT
cancels the deletion procedure and returns to the Service mode
main menu.
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
MORE...
DELETE MODE
Nr. Src Fh
Fv inp
membconf
1 1
15.6 50 video
3
FC
2 3
31.2 60 RGB3S 1
R T
3 -
15.6 50 intern
1
FC
4 2
31.5 50 RGB3S 1
FC
5 -
33.7 60 intern
2
FC
6
7
8
Active block nr. 1
DELETE BLOCK
The selected block
will be deleted !
<ENTER> to confirm
<EXIT> to cancel
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
DYNAMIC ASTIGMATISM
MORE...
DELETE BLOCK
All block
will be deleted !
<ENTER> to confirm
<EXIT> to cancel
