6-14
5975708 BARCODATA 1209S 050698
Random Access Adjustment Mode
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
Image too
Tall
Image too
Short
Ideal
Image
Hight
Ideal
Image
Hight
Vertical Linearity Adjustment
The vertical linearity adjustment function corrects for vertical non-
linearities which extend from the center of the image to the top and
bottom of the image.
Push the control disc up or down to highlight
V LINEARITY
on the
Geometry menu and then press
ENTER
.
ENTER
will select vertical linearity adjustment,
EXIT
returns to random access adjustment mode menu,
ADJUST
returns to operational mode
Adjust the vertical linearity with the control disc until the distances
between the horizontal lines of the set up pattern are equal from top
to bottom.
EXIT
will return to the Geometry menu
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
LEFT SIDE CORRECTION
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
V LINEARITY
70
Vertical Size Adjustment
Push the control disc up or down to highlight
V SIZE
on the Geometry
menu and then press
ENTER
.
ENTER
will select vertical size adjustment
EXIT
returns to random access adjustment mode menu,.
ADJUST
returns to operational mode
Adjust the vertical size by pushing the control disc up or down until
the correct image height is obtained.
Note :
- if the internal # pattern was selected, this pattern remains on the
screen.
- if the genlocked pattern was selected, the external source will be
displayed.
A bar scale and a numeric indicator give a visual indication of the
vertical size adjustment.
Hint : In order to avoid loss of resolution in the projected image and
to ensure maximum CRT longevity, do not use an excessively small
vertical size setting.
EXIT
will return to Geometry
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
LEFT SIDE CORRECTION
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
V SIZE
70
