3. Getting started
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 06 – February-2005
___________________________________________________________________
3-13
Order
The first graphic card in respect to PCI slot numbering identifies itself as primary graphic adapter by lighting the
green LED of the respective graphic channel when A
RGUS
is switched on. The primary graphic adapter is the chan-
nel, where the system emits diagnostic and status messages during system startup.
For the explicit order of the graphic cards, please refer to the sections
AGX and UGX
G
RAPHIC
C
ARDS
may not be mixed within the same system!
Each UGX
G
RAPHIC
C
ARD
provides four ports for connecting projection cubes, monitors or projectors. The upper con-
nector contains
port 0
and
1
, the lower one contains
port 2
and
3
. Thus the default sequence of the graphic
channels is:
board
1
2
3
port
0
1
2
3
0
1
2
3
0
1
2
3
channel
1
2
3
4
5
6
7
8
9
10
11
12
Figure 3-17
Each AGX
G
RAPHIC
C
ARD
provides two ports, the upper one is
port 0
, the lower one
port 1
. Thus the default se-
quence of the graphic channels is:
board
1
2
3
4
5
port
0
1
0
1
0
1
0
1
0
1
channel
1
2
3
4
5
6
7
8
9
10
Figure 3-18
For non default sequence see section
6.1.6 Advanced Argus configuration
The BAROC projection modules are assigned from left to right (view from in front of the screens) or if arranged in
a square numbered in rows starting at the top left:
1
5
6
7
8
2
3
4
Figure 3-19
Numbering of projection channels
This numbering is carried on for distributed systems. For each rendering machine the
modules are numbered as described.
Specifications
For detailed technical specifications of the graphic cards please refer to section
Содержание Argus X Terminal
Страница 1: ...User s manual Argus X Terminal...
