Barco Argus X Terminal, Руководство пользователя

Страница: 11 / 177

1. Introduction
Barco – Argus X Terminal – DOC-3265-2 – user's manual – Revision 06 – February-2005
_____________________________________________________________________
1-4
1.3 Safety instructions
This section describes safety precautions, which must be observed when installing and operating a product from
Barco.
1.3.1 Precautions
For your own protection, observe the following safety precautions when installing,
operating and servicing your device:
•
Before operating the units please read this manual thoroughly and retain it for future reference!
•
Observe all warnings and instructions printed on the devices!
•
Servicing not explicitly mentioned in this manual should never be carried out by unauthorized personnel!
Never open the case of the unit without first disconnecting the power supply cord!
•
To prevent fire or electrical shock hazard, do not expose this unit to rain or moisture!
•
This product should be operated from an AC power source!
•
Check that the voltage and frequency of your power supply match those printed on the device label with the
rated electrical values!
•
If you are not sure of the type of AC power available, consult your dealer or local power company!
•
This product is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin. This plug will
only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into
the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the ground-
ing-type plug!
•
This equipment must be grounded (earthen) via the supplied 3 conductor AC power cable. (If the supplied
power cable is not the correct on, consult your dealer.)
Mains lead (AC power cord) with CEE 7 plug:
The wires of the mains lead are colored in accordance with the following code:
green Earth (Ground)
blue Neutral
brown Line (Life)
Figure 1-1
CEE 7 plug