Barco AMM215WTTP, Руководство пользователя

Страница: 31 / 38

31 R5911667 /03 AMM215WTTP
Immunity test
IEC 60601 test levels
Compliance level
Electromagnetic
environment
– guidance
Conducted RF IEC61000-
4-6
Radiated RF IEC 61000-4-
3 3 V
0,15 MHz - 80 MHz
6V in ISM and amateur radio bands between 0,15
MHz and 80 MHz
80 % AM at 1 kHz
10 V/m
80 MHz - 2,7 GHz
80% AM at 1 kHz
Portable and mobile RF
communications
equipment should be used
no closer to any part of the
AMM215WTTP, including
cables than the
recommended separation
distance calculated from
the equation applicable to
the frequency of the
transmitter.
Recommended
Separation Distance 0.15
MHz to 80 MHz
80 MHz to 800 MHz
800 MHz to 2.5 GHz
where P is the maximum
output power rating of the
transmitter in watts (W)
according to the
transmitter manufacturer
and is the recommended
separation distance in
meters (m). Field
strengths from fixed RF
transmitters, as
determined by an
electromagnetic site
survey (a), should be less
than the compliance level
in each frequency range
(b). Interferency may
occur in the vicinity of
equipment marked with
the following symbol
At 80 MHz and 800 MHz, the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects, and people.
(a) Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and
land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast, cannot be predicted
theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the measured field strength in the location in which the
AMM215WTTP is used exceeds the applicable RF compliance level above, the AMM215WTTP should be
observed to verify normal operation. If abnormal performance is observed, additional measures may be
necessary, such as reorienting or relocating the AMM215WTTP.
(b) Over the frequency range 150 kHz to 80 MHz, field strengths should be less than [V1] V/m.
Important Information