Barco AMM215WTTP, Руководство пользователя

Страница: 25 / 38

25 R5911667 /03 AMM215WTTP
Water and moisture
• Never expose the display to rain or moisture.
• Degree of protection against the ingress of water: IPX1 compliance.
• AC adapter is not protected against water. Do not expose AC adapter to water.
Ventilation
• Do not cover the slots or openings of the monitor for proper heat dissipation. Always put the monitor in a
place where there is adequate ventilation to prevent internal heat buildup.
• Do not block the monitor cooling vents. The monitor is cooled by natural convection and has no fan
• Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may
block the ventilation slots.
Warnings
1. Federal law (United States of America) restricts this device to use by, or on order of a physician.
2. Should any solid object or liquid fall into the panel, unplug the unit and have it checked by qualified
personnel before operating it any further.
3. Unplug the unit if it is not to be used for an extended period of time. To disconnect the cord, pull it out by
the plug. Never pull the cord itself.
4. Test this equipment prior to a medical procedure. This monitor was fully tested at the factory before
shipment.
5. Do not attempt internal repairs or adjustments not specifically detailed in this operating manual.
6. Pay close attention to the care, cleaning instructions in this manual. A deviation may cause damage.
7. Do not sterilize the monitor.
8. Read the entire operating manual before assembling or connecting the camera.
9. Do not stack more than 6 boxes high.
10. The device has no means to be incorporated in an IT-network in the clinical environment.
11. The enclosure has to be checked upon collision damage, refer to qualified service personnel.
12. The protective screen is made of tested high-resistance PMMA (polymethyl methacrylate). Nonetheless
there is the possibility that it may crack if subject to strong impacts. Evaluate and prevent the risk of
possible breakages of the protective screen by correctly handling and positioning the monitor in the
operating room.
Cautions
1. Turn the power off when the unit is not in use.
2. Never operate the unit right after having transported from a cold location directly to a warm location.
3. Do not force the monitor past 28 degrees of vertical when adjusting the screen position (for monitors
equipped with stands only).
4. Remove the power module and connection when transporting the unit.
5. Do not install the unit near mechanical vibration.
6. The unit is designed for operation in a horizontal position. Never operate the unit in a vertical position.
7. Keep the unit away from equipment with strong magnets (i.e. a large loudspeaker).
8. The products have lower breaking capacity type. Do not install at the building power system prospective
short-circuit current exceeding 35 A.
9. To connect to an international power supply, use a an attachment plug appropriate for the power outlet.
10. The AMM215WTTP must be installed and operated according to the EMC information provided in this
manual.
7.2 Environmental Information
Disposal Information
Waste Electrical and Electronic Equipment
Important Information