Barco AMM215WTTP, Руководство пользователя

Страница: 17 / 38

17 R5911667 /03 AMM215WTTP
Mode Resolution
Horizontal frequency
(KHz)
Vertical frequency
(Hz)
WXGA+ 1440 x 900 70.60 75
WSXGA+ 1680 x 1050 65.20 60
WSXGA+ 1680 x 1050 (VGA only) 82.30 75
WXGA 1366 x 768 47.712 60
WSXGA+ 1920 x 1080 67.50 60
4.3 Touch Screen Driver Installation
Overview
The AMM215WTTP is available with USB connections. The touch driver is located on the enclosed CD-ROM
for these operating systems: VISTA, XP, 2000, CE, XP Embedded, Linux, Apple Mac OS.
The AMM215WTTP is Microsoft Windows HID (Human Interface Device) compatible if you use the
USB touch screen interface. No additional software driver is required for general operation of the
touch screen.
The system requires 15 seconds for Windows 7 to install/uninstall the touch drivers while turning
power on/off or plugging/unplugging USB cable.
4.4 AMM215WTTP Driver Installation Instructions
PC Running VISTA, XP, 2000
If you are using a PC running VISTA, XP, 2000:
1. Power on the PC
2. Be sure the USB cable is connected from the PC to the LCD display
3. Open the CD-ROM
4. Follow the step-by-step instructions as shown on the pop-up windows
PC running Windows XP Embedded
If you are using a PC running Windows XP embedded:
1. Power on the PC
2. Be sure the USB cable is connected to the PC
3. Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF by using the EWF
Manager command
4. Click on the XP driver on the CD-ROM and follow the step-by-step instructions as shown on the pop-up
windows
PC running Windows CE
If you are using a PC running Windows CE:
1. Power on the PC
2. Be sure the USB cable is connected to the PC
3. Using Platform Builder, build an image file by following the step-by-step instructions found in the folder file
on the CD-ROM
PC running Linux or Apple Mac OS or Custom
If you are using a PC running Linux or Apple Mac OS or Custom:
1. Power on the computer
Advanced Operation