20
Security of your card machine
When you get your card machine you should check for signs of tampering of the equipment. It is strongly advised that these checks are performed regularly after receipt. You should
check, for example: that the keypad is firmly in place; that there is no evidence of unusual wires that have been connected to any ports on your card machine or associated equipment,
the chip card reader, or any other part of your card machine.
These checks would provide warning of any unauthorised modifications to your card machine, and other suspicious behaviour of people that have access to your card machine.
Your card machine detects any ‘tampered state’. In this state your card machine will repeatedly flash the message ‘Alert Irruption!’ and further use of your card machine will not be
possible. If you observe the ‘Alert Irruption!’ message, you should contact your card machine help desk immediately. You are strongly advised to ensure that privileged access to your card
machine is only granted to staff that have been independently verified as being trustworthy.
Caution:
never ask the customer to divulge their PIN code. Customers should be advised to ensure that they are not being overlooked when entering their PIN code. Your card machine
must never be put in or left at a location where it could be stolen or replaced with another device.
Telephone call (Bluetooth)
You have an urgent call to make while the IWL2 series is occupying the line. In order to get a dial tone quickly, place the handset in the hang up position, pressing the red cancel button
or disconnect the base power supply from the mains network or disconnect the IWL2 series telephone connector from the telephone call socket, and place the telephone connector into
the telephone wall socket. You should hear a dial tone within 6 seconds.
Specific absorption rate (SAR) for Bluetooth and GPRS devices
In order to meet FCC and Industry Canada RF Radiation exposure limits for the general population, this device must only be operated when held in the hand or in a desktop position with
a minimum separation distance of at least 20cm from the user’s body and must not be co-located or operated in conjunction with any other antenna or transmitter. Use of this device
with an accessory in order to be worn and operated on the user’s body is strictly prohibited and will invalidate the certifications obtained for FCC and Industry Canada.
Содержание iWL250
Страница 1: ...1...