Barbecook PARTY QuickStart, Руководство пользователя

Страница: 6 / 22

CONGRATULATIONS ON THE
PURCHASE OF A BARBECOOK ®
!IMPORTANT:
Your barbecook ® QuickStart ® has an
extremely simple lighting system. Starter
fluid or firelighters should not be used.
Always follow the instructions for use. Please
check before every use if the clips are closed.
The barbecue can not be used when the clips
are open.
ASSEMBLY
1) Attach the wheels (n° 7) to the left tubing
(n° 3) and fix them with the clasps
(n° 8). Make sure the clasps are tightened
sufficiently.
2) Put the cross bar (n° 9) on both left and
right tubings and fix them with the screws
(n° 6).
3) Put the front wooden board (n° 11) in the
holders on both left and right tubing.
4) Fix the herd (n° 2) with screws (n° 4 & 5).
5) Attach the two lightening tubes (n°13) to
the herd (n°2) with the three screws and
nuts ( n°15).
6) Attach the ashtray (n°14) with the clips to
the lightening tube (n°13).
7) Put the two stainless steel charcoal grills
in the herd (n°1).
8) Put the cooking grid (n° 12) in the desired
position.
INSTRUCTIONS FOR USE
A) Lighting:
Remove the ground grid (1). Take three
double sheets of newspaper and scrumple
them up separately in the form of a torch.
Insert these sheets of newspaper in the
inner tube (13). Put the ground grid back
in place and spread dry charcoal on top of
the ground grid (do not use too much
charcoal when lighting the barbecue).
Open the ventilation hole and light the
newspaper throught the hole with a long
match or lighter. The burning paper will
light the charcoal. The smoke you see is
produced by the humidity of the charcoal
and the newspaper. After at least
15 minutes, your barbecook
® is ready for
use. (At that moment, the glowing
charcoal is covered with a fine layer of
grey ashes.)
We advise to wait to install the cooking
grill on the barbecue until it is ready for
use.
B) Regulating the fire:
The fire intensity can be regulated in a
simple way by opening or closing the
ventilation hole.
C) Maintenance:
After having used the barbecue, remove
the ground grid and brush the ashes
toward the centre of the bowl. Afterwards,
release the barbecook
® from the
QuickStop ® and pour out the water / ash
mixture on an appropriate spot.
FIRST TIME USE
When using the barbecook ® for the first time,
we strongly recommend to have it burn for
30 minutes without cooking meals. This
initial period is necessary.
USEFUL HINTS AND
PRECAUTIONARY MEASURES
1) The barbecook ® can be used only out of
doors.
2) Always install the barbecue on a solid
base, away from inflammable and
meltable objects.
3) It is recommended to empty out the
QuickStop ® each time the barbecue has
been used.
4) The bowl of the barbecook ® has a capacity
of approximately 8L. (Optima) – 10L.
(Major & Arena). Do not use too much
charcoal in the bowl (max. 50%).
5
partyBinnen20pag.qxd 15/03/2005 8:47 Pagina 5