manualshive.com logo in svg

barbas UNILUX-3300, Руководство по установке

Поделиться
Скачать
barbas UNILUX-3300 Скачать руководство пользователя страница 48

48

UNILUX-3  200 L / 200 R / 300  

Do I have to take any extra measures if the room I am heating has an 
extractor fan (mechanical ventilation)?

A fl ue gas fan is required for permanent extraction of the area in which the 
fi replace is placed.
The type of fl ue gas fan depends on the capacity of the extractor system. 
Always consult your installation engineer about this.

What is creosote?

Creosote is a tar-like deposit which is left in the chimney. It is formed in poor 
combustion conditions when burning wood (damp wood, pinching off the 
air supply to the fi re or burning impregnated or painted wood for example). 
Creosote ignites at approx. 500°C. This temperature can easily be reached if the 
fi re is raging. This means that deposits of creosote in your chimney could cause 
a chimney fi re.

What happens when wood is burnt?

The combustion process.
The combustion of wood involves the following steps.

Drying
The fi rst step is that the fuel (wood) dries out. Even at low temperatures 
(~ 100°C), any moisture still in the wood will evaporate. This drying procedure 
implies a signifi cant loss of energy if wood which is ‘too’ damp is burnt. The 
right degree of moisture is achieved after 1.5 - 2 years of drying. The moisture 
content is then 15 - 17%.

Decomposition
At moderate - high temperatures (150°C - 350°C), the decomposition process 
can be discerned. This is when the chemical structure of the fuel breaks down. 
This process involves the creation of volatile compounds such as carbon 
monoxide (CO), water vapour (H

2

O) and methane (CH

4

). In addition, substances 

which are volatile at decomposition temperature but condense at lower 
temperatures are often released. These are the tar-like components (this by-
product is also known as creosote, which is deposited in the chimney and cold 
parts of the fi re in poor burning conditions).

Combustion of the products of decomposition
The volatile compounds burn in the gas phase if O

2

 (air) is added. The ignition 

temperature of these volatile compounds is approx. 550°C.

Combustion of solid hydrocarbons
The solid component that remains consists of pure hydrocarbons, which will burn 
at approx. 800°C if O

2

 (air) is added.

Содержание UNILUX-3300





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды