barbas ENERGA 80-50, Руководство по установке

Страница: 18 / 76

18
ENERGA 80-50
2.4 BASIC REQUIREMENTS FOR POSITIONING BUILT-IN FIRES
General
The appliance may only be set up in a room in which the location, architectural con-
struction and activity is not endangered by the presence of a fi re. The surface on which
the appliance is to be placed must be correctly shaped and big enough to accommodate
the appliance safely (in compliance with DIN 18895, part 1).
When fi tting, all local and/or national safety regulations must be followed closely, parti-
cularly in rooms with walls/fl oors containing fl ammable material. If in doubt, consult the
fi re prevention department of your local fi re brigade and/or the architectural department
of your local authority.
2.3 ACCESSORIES
The following accessories can be supplied by your dealer:
Part no Accessorie
332711 3-Sided 35 mm frame Energa 80-50
332712 4-Sided 35 mm frame Energa 80-50
322920 Set carrying brackets (2 pieces)
311967 Mantle iron L = 1250 mm
329231 Fan set Energa:
Set, consisting of 1 convection fan (230 VAC /
24 W) including clickson (temperature-switch)
and assembly materia l.
302156 • 1x Convection fan 230 VAC / 24 W
302154 • 1x Clickson
329646 • 1x Cable (short) Energa
329273 • 1x Cable (long) Energa
312829 Convection set General :
(for convection air extraction)
Advice: use if appliance is installed with fan-set
302188 • 1x Flexible aluminium pipe Ø125 mm, L= 3 m (max.)
310178 • 2x Fitting box 135 x 135 mm
309872 • 2x Convection exit grid, white, 145 x 145 mm
309730 • 2x Collar adaptor Ø125 mm
304040 • 4x Hose clamp Ø125 mm