barbas ECO 810, Руководство по установке

Страница: 14 / 48

14
ECO 810
Cleaning the chimney/fl ue
Make sure your chimney/fl ue is cleaned at least once a year by a recognized
chimney sweep. Your principle fuel source must be well-dried wood of suitable
dimensions. The moisture content of the wood should be approximately 15%,
and the length and diameter 32 cm.
If the chimney has a chimney valve, the free opening in the chimney valve fl ap
must measure at least 12% of the surface.
3.3. FITTING THE STOVE
The appliance can make use of either a top or rear connection Ø150 mm for the
fl ue (chimney).
In connection with the weight of the appliance, it is advisable to remove
temporarily as many heavy components as possible before moving it.
Depending on the chosen set-up, attach the (cast-iron) connection to the top or
the rear of the appliance.
Fit the sealing plate and the protective plate to the other opening.
Situate the appliance in such a way that the fl ue gas outlet is precisely in line
under the chimney connection (niche pipe) in the ceiling (top connection) or with
the chimney connection (niche pipe) in the wall (rear connection).
Important: Ÿ If use is made of the top connection, you must also assemble the
small brake plate (above) supplied. This plate must be mounted
26 mm from the underside of the connection, making use of 2
spacing collars.
Ÿ
If a rear connection is used, the small brake plate (above) must
not
be fi tted!!