barbas ECO 810, Руководство по установке

Страница: 29 / 48

29
ECO 810
We recommend that you maintain a substantial layer of ash (2 - 3 cm). This not
only forms a protective layer for the base of the appliance but also signifi cantly
reduces consumption of fuel and allows new wood to catch light easier.
When loading the stove with fuel, two blocks measuring 25 cm long and 30 cm
in diameter is suffi cient. Do not add more fuel until the previous fuel has burned
down to the charcoal stage. Do not leave the door open longer than necessary.
Weather conditions
In order to reduce pollution and any other inconvenience, we advise not fi ring up
the stove when there is no wind, or in foggy/misty conditions.
Smoke development
The stove is designed for use with a closed viewing / fi lling door. Should you
use it with the door open, under certain circumstances (presence of mechanical
ventilation, draught, differences in barometric pressure) smoke may enter the
room in which stove is situated.
Use of the stove
Your stove is suitable for continuous use.
The appliance is fi tted with a soapstone or cast-iron casing on the outside.
These casings fi rst absorb a lot of heat (heat accumulation) before emitting
(radiation / convection) warmth.
Using the stove for short spells is ineffi cient.
The stove may only be used in an area where the location, the building
construction and the activities in the room concerned do not present any danger
for operating the fi re safely.
Ventilation
When using the stove, ensure a good supply of fresh air, particularly if the
combustion air is drawn from the room itself. If your dwelling has mechanical
ventilation, switch it off while the stove is in use.
Spare parts
Any replacement parts must be new, original parts. Use of non-original/
reconditioned parts will invalidate your warranty.
Modifi cation
Do not make modifi cations to your stove. Any alteration to your stove, of
whatever nature, will also invalidate your warranty.