barbas ECO 810, Руководство по установке

Страница: 34 / 48

34
ECO 810
8. FUELS
8.1. WOOD
Suitable fuels are:
Ÿ
All sorts of clean wood (forested). The wood must have been dried for at
least two years. Well-dried wood has a humidity percentage between 10 and
20%.
Recommended dimensions: length 25 cm; outline 30 cm.
Ÿ Compressed wood blocks without binder (see wood dimensions).
Ÿ Hard woods burn slowly and easily form charcoal; for example hornbeam,
oak, ash, beech, elm and birch. Softwood burns with more fl ame, but forms
less charcoal and radiates less heat. Examples are spruce, pine, poplar and
linden.
Unsuitable fuels are:
Ÿ Painted, bonded (chipboard, MDF etc.) or impregnated wood, plastic and
other fl ammable waste. Stoking a fi re with this is completely forbidden. The
combustion gases released by these materials are aggressive and will attack
your fi re and the environment.
Ÿ Paraffi n-containing open fi re lighters are not suitable for your stove. A closed
stove generates more heat than an open fi re, thus the paraffi n will melt out of
the blocks prematurely.
Ÿ
Damp wood burns poorly, is unsuitable and produces too much smoke
(including in the room when you are topping up the wood), dirties the glass,
leaves deposits in the chimney and delivers about half the heat output of
dried wood.
The appliance is also suitable for burning coal.