barbas ATLANTA, Инструкция по использованию и установке, Страница: 6 / 27

7
ENGLISH
ATLANTA SAVANNAH
ECO 550
ECO 650
ECO 750
1.4 IGNITING THE FIRE
l
Open the gas supply valve in the gas pipe to the fire.
l
Lock the slider into “ l l l l l ” position.
l
Turn the thermostat knob to the ignition position “
« « « « «
” and then push the knob in.
l
While keeping the thermostat knob pushed in, press the ingition button a few
times to ignite the pilot light. Check through the glass that the pilot light has
been lit.
l
When the pilot light is lit, keep the thermostat knob pushed in for a further 10
seconds, after which it can be released.
IMPORTANT: If the pilot flame goes out, then wait for at
least 5 minutes before repeating the above
procedure.
l
By turning the thermostat knob to the required setting and/or pushing the slider
into an downward position: the burner will now ignite.
1.5 TURNING OFF THE FIRE
l
Turn the thermostat knob to the ignition position “
« « « « «
”.
l
Lock the slider to the “
l l
l l l ” position.
The burner will now be fully extinguished.
If the thermostat knob is turned back to the “1” position, then the burner will
continue to operate for as long as the room temperature remains below 13°C.
1.6 EXTINGUISHING THE PILOT LIGHT
l
Extinguish the pilot by setting the thermostat knob to the “
l l l l l
” position.
l
If the gas fire is not going to be used for a long period of time, it is
recommended to close the gas supply valve to the fire.
IMPORTANT: If the pilot flame goes out for any reason,
wait for 5 minutes before attempting to
re-light it.
l
If the pilot light frequently goes out, then please contact your installer.