BAQ kaloMAX NT II, Руководство пользователя

Страница: 18 / 23

BAQ kaloMAX NT II Manual
The pre-pressure for pneumatic dosage can be adjusted by using the rotary knob on
the back of the device. The setting is shown on the upper left part of the main screen.
5.2.1 Input range
Minimum Maximum
Speed
Ball revolutions 15 /1/min 590 /1/min
Grinding speed 1.4 /m/min 55.8 /m/min
Shaft revolutions 30 /1/min 1000 /1/min
Distance
Number of ball revolutions 13 /U
B
9200 /U
B
Grinding path 1.2 /m 870 /m
Number of shaft revolutions 20 /U
S
15000 /U
S
Grinding ball diameter 12 /mm 40 /mm
5.3 Start / Stop
Press START on the main screen to start the grinding process.
A small amount of grinding suspension is put on the grinding ball, i.e. the valve opens
for the defined dosage time.
After a pause of 1.5 seconds, the motor starts.
The grinding process can be aborted anytime by pressing the STOP button. The
grinding process ends after the grinding path has been covered or the number of
revolutions has been completed.
Page 18