Standard Range ZPM - Zone Pressure Sensor
in a BAPI-Box Enclosure
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:[email protected] • Web:www.bapihvac.com
1 of 5
Installation & Operations
47138_ins_ZPM_SR_BB
rev. 04/13/22
3. Choose DIRECTION
Bidirectional is a plus/minus range so
choosing 5” range is -5” to +5” Bidirectional
and 0” to +5” Unidirectional
Identification and Overview
BAPI’s ZPM is designed for quick
and easy field installation. The
outputs, ranges, units, directionality,
are all easily set in the field without
powering the unit.
The optional LCD display helps with
troubleshooting because it displays
the actual pressure regardless
of the selected pressure range.
Three LEDs on the face of the unit
indicate when the pressure is “Out
of Range Low”, “In Range” or “Out
of Range High” for the selected
range. The appropriate LED will
flash when out of range.
Switch Setup - Outputs, Ranges, Units/Response
Fig 2:
Setup
Switches for
Standard
Range Units
Fig. 1:
ZPM
BAPI-Box Unit and
Associated Parts
1. Select OUTPUT
2. Select RANGE
If unit is ordered with a Custom Range,
then the switch must be set to R6.
4. Choose UNITS - Inches WC or PASCALS
5. Choose RESPONSE TIME
Fast Response = 1/2 second
Slow Response = 4 seconds
6. Mount, Terminate and Auto-Zero the unit as
described in later sections.
NOTE!
Always follow the Auto-Zero procedure after changing settings.
Bulkhead fitting
for static probe
Static probe
and tube
with surge
damper
(for units
ordered with
the included
static probe)
Cover latch
screws
Conduit
foam plug
Static probe
screws
Mounting
screws
Deadhead
tubing
