background image

Tight seam

If click, switch between function OFF, starting tight seam function ON, ending tight
seam function ON and full function in turn.
If long-press, switch to tight seam function setting.

Presser foot lifting

If click, switch between automatic presser foot lifting after pause, automatic presser foot
lifting after trimming, full function and function off in turn.

Half anti-side
trample foot lifting

If click, set used or cancelled half anti-side trample foot lifting function.

Auto function

In constant stitch sewing mode, If click, set used or cancelled auto function.

Back-tacking
pattern

If click, set used or cancelled back-tacking pattern function.

Slow launch
setting

If click, set used or cancelled slow launch function.

Advanced
parameter settings

If double click, enter the advanced parameter setting interface.

Trimming count
display

The trimming count value is displayed.
If double click, the count is cleared.

Sewing speed
display

The sewing speed of the current mode is displayed.
If click, select this data, and you can adjust the data by parameter increase and decrease
keys.

Sewing stitches
length display

The stitch length of the current mode is displayed.
If click, select this data, and you can adjust the data by parameter increase and decrease
keys.

1.2 Pattern Seam Interface Description

No.

Items

Range

Default

Description

1

1-8

1

"3" stands for the number of the pattern. The
figure represents the 3rd pattern.

3

Содержание GT-288C-D4















Отзывы: