Baoli CPCD 80, Инструкция по эксплуатации и обслуживанию

Страница: 21 / 112

15
(54) According to the Directive 2000/14/EC and based on EN12053 standard
，
the
noise pressure level at the operator’s position and the measured sound power level and
the guaranteed sound power level is referred to the following table. But the noise of the
forklift truck may fluctuate due to different operation and the influence of the external
environment.
(55) The driver feels the vibration of the forklift truck when operating and traveling
the forklift truck.. According to ISO3691 and based on EN13059 standard. The vibration
of the forklift truck fluctuates according to environment condition. In normal working
condition, the vertical direction acceleration mean value from the seat to the operator by
testing is in the following table. But the vibration frequency felt by the driver depends on
the working condition (etc. road, operation method), so the actual vibration frequency
must be determined according to environment condition when necessary.
(56) To prevent the fire, accident or other unpredictable event, prepare the fire
extinguishers in advance and operate them according to the instructions.
(57) Preventive maintenance services should be done before or after using the
truck. Anytime you find that the truck is not functioning properly, operation of the truck
should be halted and check or repair the trouble.
(58) When operating the machine, observe and follow all markings on the machine.
If the marking is lost, please stick it in time.
Model
The noise pressure
level at the
operator’s position
The measured
sound power level
The
guaranteed
sound power
level
The vertical
direction
acceleration
mean value from
the seat to the
operator
EN12053 EN12053 2000/14/EC
CPCD80 87 dB(A) 110 dB(A) 111 dB(A) 0.92 (m/s
2
)
CPCD100 86 dB(A) 109 dB(A) 111 dB(A) 1.06 (m/s
2
)