Baoli CPCD 80, Инструкция по эксплуатации и обслуживанию

Страница: 101 / 112

95
9.2 Brief explanation for operation
(1) Starting
There is a starting protection circuit in the control box for the forklift truck. You have
to shift the direction switch in neutral before you start the engine. Otherwise, you can
not start the engine.
T
urn the key switch clockwise to the first “on” position, the instrument circuit and the
firing circuit is ready for work. See Fig9.3.
Turn the imported 6BG1 engine in reverse direction without loosening it, at the
same time, preheat it until the turning stops.
Fig9.3 Key switch
Turn the key switch clockwise to the second “on” position (starting position), then
start the engine.
After engine starting, push the direction switch forward (that is forward gearshift),
then pedal accelerator, the forklift truck runs faster and you can begin to work. When
pull the direction switch backward (that is in reverse gearshift), the backing lamp is on
and the buzzer sounds.
(2) Lamp switch
Pull the lamp switch to the first “on” position, the front lamps and rear lamps are on.
Pull the lamp switch to the second “on” position, the headlights are on while the front
lamps and rear lamps keep on.
(3) Turning signal
Pull the turning switch backward, the left turning lamps flash. Push the turning
switch forward, the right turning lamps flash.
(4) Brake signal
When you pedal brake, the brake lamps (red) in the rear combination lamps are on.
(5) Backing signal