2
June 20, 2012
[UV/MODE]
Momentarily press to
switch the VFO between UHF Mode
and VHF
Mode.
Press and Hold to
switch between VFO and Memor
y.
[LAMP/FM]
Momentarily press to
light the Torch
.
Press and Hold to activate or deactivate the
FM Radio
function
.
F+[MENU/LOCK]
Press the F/ALERT], then press [MENU/LOCK], to
Activate Scanning Function
.
F+[UV/MODE]
Press the F/ALERT], then press F+[UV/MODE], to activate
the “Memory Write” mode.
F+[DIAL]
Press [F/ALERT]; then rotate the [DIAL] knob, to increase
or decrease the
frequency at ± 1MHz
.
[VOL/MON]+ [DIAL]
Press [VOL/MON]; then rotate the [DIAL] knob, to adjust
volume level.
Tone Calling
Press and hold in the button [ PTT ] and [VOL/MON] to enter
the Tone Calling Mode(1750Hz). The transceiver will send out
a 1750Hz signal. Release the button [VOL/MON] to exit.
Restore to Default Factory Setting
Press and hold the key [ ON/OFF ] + [ F/ALERT ] , then Power
ON, the transceiver will restore to the default factory settings.
Factory Default Setting are: 400.000MHz, No CTCSS/DCS,
Low Output power, Battery Save, Volume Level 5, SQ 5, Key
Tone ON, other settings are OFF.
