8
June 20, 2012
5) Press [ MENU/LOCK ] or [ PTT ] to EXIT to normal
operation.
STEP (Channel Spacing Selection)
The UV-3R's frequency synthesizer provides the option of
utilizing channel steps of 12.5/25KHz per step (plus optional
values differ depending on the band selected).
1) Press [ MENU/LOCK ] then rotate the [ DIAL ] knob to
MENU [9], STEP
2) Press the [ U/V ] key to enter the set mode.
3) Clockwise or counterclockwise rotation of [ DIAL ] knob to
select the new frequency step size.
4) Press the [ U/V ] key to save the setting.
5) Press [ MENU/LOCK ] or [ PTT ] to EXIT to normal
operation.
OFFSET (Repeater Operation)
1) Press [ MENU/LOCK ] then rotate the [ DIAL ] knob to
MENU [10], OFFSET
2) Press the [ U/V ] key to enter the set mode.
3) Clockwise or counterclockwise rotation of [ DIAL ] knob to
set the offset frequency (0- 37.995M10---69.995M).
4) Press the [ U/V ] key to save the setting.
5) Press [ MENU/LOCK ] or [ PTT ] to EXIT to normal
operation.
SHIFT (Repeater Shifts)
Depending on the part of the band in which you are operating,
the repeater shift may be either downward (-) or upward (+).
One of these icons will appear at the top of the LCD when
repeater shifts have been enabled.
1) Press [ MENU/LOCK ] then rotate the [ DIAL ] knob to
MENU [11], SHIFT
2) Press the [ U/V ] key to enter the set mode.
