User
Manual
of
DMR
‐
5R
Digital
Two
‐
way
Radio
BLUE
In receiving mode, turn on the blue light.
ORANGE
In receiving mode, turn on the orange light.
selection
PURPLE
In receiving mode, turn on the purple light.
OFF
Turn off the backlight
BLUE
In transmitting mode, turn on the blue light.
ORANGE
In transmitting mode, turn on the orange light.
27 TX-LED
Transmitting
backlight selection
PURPLE
In transmitting mode, turn on the purple light.
VHF
Set the working frequency band as
136~174MHz
28 BAND
Frequency band
selection
UHF
Set the working frequency band as
400~520MHz
OFF
The two-way radio doesn't send out shutdown
code after PTT key is released. Let it appear
when the signaling is retransmitted by the relay
station so as to confirm that the signal
transmitted by this two-way radio is received
and retransmitted.
30 STE
Tail tone
elimination
ON
The two-way radio sends out shutdown code
after PTT key is released to inhibit
instantaneous noise appeared at the receiver.
OFF
31 RP-STE
Across-relay tail
tone elimination
1,2,…,10
When transmitting across the relay and
retransmitting, after the transmitter releases the
PTT key, the two-way radio enters receiving
state. Due to the delay of relay, the instant
signal transmitted by the relay can be received
。
The value of the menu item shall be adjusted to
ensure that no noise of this two-way radio is
generated when transmitting across the relay, so
as to confirm whether the relay is operating.
The menu item shall be set OFF, which is
available only in analog mode (unavailable for
digital mode).
OFF
32 PRT-RL
Delay time of relay
tail tone
1,2,…,10
When the signal is transmitted across the relay
station and retransmitted by it, in order to
confirm whether the relay station has
retransmitted the signal for this two-way radio,
the delay time of the relay station stopping
transmitting shall be utilized to confirm that the
signal has been retransmitted. The menu item is
used to adjust the time of the noise. If the noise
isn't needed, please set it as OFF, which is
available only in analog mode (unavailable for
digital mode).
FULL
Full-screen character display
33 PONMGS Startup
display
MGS
Type and model display
ON
Activate call end prompt tone
34 ROGER
Call end prompt
tone
OFF
Deactivate call end prompt tone
VFO Menu
initialization
35 RESET
Initialization
ALL
Menu and channel initialization
FM
Inquire the operation mode in channel mode and
modify the operation mode in VFO mode
36 MODE
Operation
mode
DMR
Inquire the operation mode in channel mode and
modify the operation mode in VFO mode
37
CP Ver.
Software version
XXXXXX
Inquire software version number (date)
DMR digital menus shall be accessed and operated in digital channel, as detailed below:
Menu
Display
Function description
Display
character
of
Instructions for setting of secondary menu
