User
Manual
of
DMR
‐
5R
Digital
Two
‐
way
Radio
Turn off the two-way radio, insert the antenna into the mounting hole and rotate it clockwise. (As shown in Figure 2-1)
For antenna removal, rotate the antenna anticlockwise and remove it. (As shown in Figure 2-2)
3
．
Belt clip installation/removal
z
Remove the two screws of the battery. Align the two screw holes of the belt clip with screw holes at the top of the battery,
install the belt clip and tighten the screws (As shown in Figure 3)
z
Loosen the screws and remove them from the belt clip (It is suggested that you install the screws on the battery for the
convenience of next installation and use of the belt clip).
4
．
Installation of external headphone/microphone (Optional accessories shall be purchased separately)
Open the headphone cover and insert the headphone plug into the headphone jack. When the headphone isn't used, remove the
headphone plug from the headphone jack and close it with the headphone cover. When the general interface isn't used, please close it
with the dust cover. (As shown in Figure 4)
■
Have an intimate knowledge of this two-way radio (illustration)
