User
Manual
of
DMR
‐
5R
Digital
Two
‐
way
Radio
OFF
Deactivate prompt language
CHI
Prompt in Chinese
14 VOICE
Prompt
language
ENG
Prompt in English
TO
Time scanning mode means continuing the
scanning 5 seconds after finding the signal
CO
Carrier scanning mode means continuing the
scanning after the signal that is found
disappears
15 SC-REV
Scanning recovery
mode
SE
Search scanning mode means stopping scanning
after finding the signal
16
ANI-ID
Inquiry of ID of this
two-way radio
Used for inquire the ID code set in this two-way
radio (The ID code can only be written via
frequency writing software).
FREQ
In segment A channel mode, the channel is
displayed by way of frequency.
CH
In segment A channel mode, the channel is
displayed by way of channel number.
17 MDF-A
A channel display
mode
NAME
In segment A channel mode, the channel is
displayed by way of channel name (Specific
name is set in frequency writing software)
FREQ
In segment B channel mode, the channel is
displayed by way of frequency.
CH
In segment B channel mode, the channel is
displayed by way of channel number.
18 MDF-B
B channel display
mode
NAME
In segment B channel mode, the channel is
displayed by way of channel name (Specific
name is set in frequency writing software)
OFF
Allow transmitting even if the channel is
occupied.
19 BCL
Busy channel
lockout
ON
Prohibit transmitting if the channel is occupied.
OFF
Deactivate automatic keyboard lock
20 AUTOLK
Automatic
keyboard lock
ON
Activate automatic keyboard lock function
OFF
In frequency mode, there isn't difference
between transmitting frequency and receiving
frequency.
+
In frequency mode, the transmitting frequency
is the receiving frequency plus the frequency
difference.
21 SFT-D
Frequency
difference direction
-
In frequency mode, the transmitting frequency
is the receiving frequency minus the frequency
difference.
22 OFFSET
Frequency
difference
00.000,…,69.990
Difference between transmitting frequency and
receiving frequency in frequency mode
(controlled by frequency difference direction)
23 MEMCH
Channel
storage
000,…,127
For channel storage, it is used to indicate the
number of the channel to be stored. If
CH-character is displayed in front of the
numbers, the channel has previously stored
channel parameters.
24 DELCH
Channel
deletion
000,…,127
Delete the channel parameters of specified
channel. If there isn't CH-character in front of
the numbers, the channel doesn't have
parameters, and the operation is invalid.
OFF
Turn off the backlight
BLUE
In standby mode, turn on the blue light.
ORANGE
In standby mode, turn on the orange light.
25 WT-LED
Standby backlight
selection
PURPLE
In standby mode, turn on the purple light.
26
RX-LED
Receiving backlight
OFF
Turn off the backlight
