Bante920 Benchtop pH/ORP Meter
8
Auto-Hold:
When the auto-hold function is enabled, the meter
will automatically sense a stable end-point reading
and freeze it.
Enable
Disable
●
Auto-Power Off:
When the auto-off power is enabled, if you do not
press any key within a specified time period, the
meter will automatically turn off.
10 minutes
20 minutes
30 minutes
Disable
●
Calibration Due:
When calibration due reminder is enabled, if you do
not recalibrate meter within a specified time period,
the meter will automatically show
indicator.
…
1 to 31 days
Disable
●
Date and Time:
Sets the date and time of the meter.
---
---
Clear stored data:
Clear all stored data.
Enable
Disable
●
Reset:
Reset function allows user to restore the meter
back to factory default parameters. When this
function is enabled, all calibration values and
selected parameters will be lost or reset.
Enable
Disable
●
Setting the Default Parameters
1.
If necessary, press MODE key until the display shows corresponding mode indicator (e.g., pH mode).
2.
Press and hold the
key for 3 seconds, the meter enters setup menu, the display shows selectable parameter and page number.
