10
Data Management
Data Management
The TB100 portable turbidity meter is capable of storing and recalling up to 100 data sets.
Storing a measurement result
In the measurement process, press the
MI
key to store the reading into the memory, the Memory icon appears on the display.
Viewing the data log
1.
Press the
MR
key in the measurement mode, the meter shows the serial number of stored data (e.g. LOC/1).
2.
Press the
►
key, the display shows the date and time of measurement (Format: mm-dd, hh-mm).
3.
Press the
►
key, the display shows the stored data.
4.
Press the
►
key again, the display shows the next data set.
5.
Press the
Meas
key, the meter returns to the measurement mode.
Deleting the data log
If the memory is full, the meter will automatically show
when the MI key is pressed. To delete data logs, please follow the steps below.
1.
Press and hold the
key for 3 seconds to enter the setup menu.
2.
Press the
◄
key until the display shows
/
.
3.
Press the
Enter
key, the display shows
/
.
4.
Press the
◄
key to select the
/
.
5.
Press the
Enter
key to confirm.
