4
Setup Menu
Setup Menu
The TB200 turbidity meter contains an integrated setup menu that is used to customize the displayed option to meet measurement requirement.
The following table describes the functions of each menu item.
Menu
Options
Description
Default
Date and Time
Year, month, day, hour, minute
Set the date and time
---
Measurement Mode
NTU
Nephelometric turbidity unit
NTU
FNU
Formazin nephelometric unit
EBC
Turbidity unit of the European Brewery Commission
ASBC
Turbidity unit of the American Society of Brewing Chemists
mg/L
Total suspended solids unit
Resolution
0.1
Set the resolution of the turbidity measurement
0.1
0.01
TSS Factor
---
Set the conversion factor for measurement of the total
suspended solids
0.13
Auto-Power Off
2 hours
When the option is enabled, the meter will automatically
switch off if no key is pressed within 2 hours
Disable
Disable
Delete Data
Delete all stored data
Delete all data logs in the memory
Cancel
Cancel
Brightness
Low, mid, high
Set the brightness level of backlight
---
Password
Enable
Set the password protection for calibration and settings
Disable
Disable
Reset
Enable
Reset the meter to factory default settings
Disable
Disable
Setting the default option
1.1 Press and hold the
key for 3 seconds to enter the setup menu.
1.2 Press the
◄
/
►
key to select a menu item, press the
Enter
key to confirm.
1.3 Press the
◄
/
►
key to select a desired option, press the
Enter
key to confirm and return to the measurement mode.
