11
Data Management
Data Management
The TB200 turbidity meter is capable of storing and recalling up to 200 data sets.
Storing a measurement result
In the measurement process, press the
MI
key to store the reading into the memory, the screen shows
“Data is stored in memory”
.
Viewing the data log
1.
Press the
MR
key in the measurement mode, the meter shows the stored data.
2.
If necessary, press the
◄
/
►
key to switch pages.
3.
Press the
ESC
key, the meter returns to the measurement mode.
Deleting the data log
If the memory is full, the meter will automatically show a reminder screen when the MI key is pressed. To delete data log, please follow the steps
below.
1.
Press and hold the
key for 3 seconds to enter the setup menu.
2.
Press the
◄
/
►
key to select the “Delete Data”, press the
Enter
key to confirm.
3.
Press the
◄
/
►
key to select the “Delete all stored data”.
Press the
Enter
key, the meter shows a warning “Are you sure you want to
delete all stored data
?”
4.
Press the
Enter
key to confirm or the
ESC
key to cancel.
