STEP 3 – SMART-TEACH Configuration
SMART-TEACH is the intuitive Human Machine Interface designed to improve ease of installation and maintenance. Status
and diagnostic information are presented using the five colored LEDs, and the single push button gives immediate access
to the following functions:
•
AutoLearn—to self-detect and auto-configure for reading unknown
barcodes (by type and length)
•
AutoSetup—to self-optimize and auto-configure reading performance
in demanding applications
•
Test Mode with bar-graph visualization—to check static reading
performance
SETUP
LEARN
TEST
READY
GOOD
TRIGGER
COM
STATUS
NOTE: If using the TCNM-ACM-OM110 accessory, when entering the SMART-TEACH interface, the
Oscillating Mirror remains in the default fixed position (–15°) to make barcode reading easier while
performing the SMART-TEACH functions.
Table 1: Indicators
Label
Color
Meaning
READY
Green
Indicates the device is ready to operate
GOOD
Green
Confirms successful reading
TRIGGER
Yellow
Indicates the status of the reading phase
COM
Yellow
Indicates active communication on main serial port
STATUS
Red
Indicates a NO READ result
During the reader startup (reset or restart phase), all the LEDs blink for one second.
On the back of the reader near the cable, the “POWER ON” LED indicates the laser scanner is correctly powered.
Auto Learn
If you are configuring your scanner using SMART-TEACH, you must start with the Auto Learn procedure.
1. Hold the SMART-TEACH push button pressed until the LEARN LED is on.
TCNM-AD Barcode Scanner
P/N 175718 Rev. A
www.bannerengineering.com - tel: 763-544-3164
5
