Banner Sure Cross DXM1000-B Series Скачать руководство пользователя

Страница: 40 / 73

RF Ctrl

—Displays the status of the ISM radio DIP switch 1 (off or on). The menu doesn't allow the user to change the DIP

switch setting through the display.

6.5.2 Ethernet

Use the

Ethernet

submenu to sets the IP Address, Gateway Address, and Subnet mask of the DXM700's Ethernet interface.

You may change these settings either from the LCD menu (

System Config

Ethernet

) or from the XML configuration file

created by the DXM Configuration Software.
The network address settings from the LCD menu have the highest priority and override settings in the XML configuration

file. To use the parameter settings from the XML configuration file or use DHCP, execute the

Reset

under

System Config

Ethernet

or use the LCD display to set the IP Address, Gateway Address, and Subnet Mask to 255.255.255.255. Reboot the

DXM700 after changing the Ethernet parameters.
The Ethernet cable should be attached before powering up the DXM700.

6.5.3 DXM Modbus ID

Use the secondary Modbus RS-485 port when the DXM700 is connected to a Modbus RTU network as a Modbus slave

device. Set the Modbus ID for the secondary RS-485 port using the LCD display menu

System Config

DXM Modbus ID

6.5.4 LCD Contrast

Use the

LCD Contrast

option to adjust the LCD contrast. Adjust the starting number lower to decrease the display contrast.

The factory default is 28. Do not set a number less than 15 or the display may not be bright enough to see to change back.

6.5.5 Reset

Use the

Restart

menu to force the main processor to restart. This does not affect the other boards in the system.

Sure Cross

DXM700-Bx Wireless Controller

www.bannerengineering.com - Tel: + 1 888 373 6767

Содержание Sure Cross DXM1000-B Series









































































Результаты поиска

Содержание Sure Cross DXM1000-B Series

Отзывы:

Похожие инструкции для Sure Cross DXM1000-B Series

Бренды по названию

Популярные бренды

Banner Sure Cross DXM1000-B Series, Инструкция по эксплуатации

Результаты поиска

Содержание Sure Cross DXM1000-B Series

Отзывы:

Похожие инструкции для Sure Cross DXM1000-B Series

Бренды по названию

Популярные бренды