manualshive.com logo in svg

Banner Sure Cross DXM1000-B Series, Инструкция по эксплуатации

Инструкция по эксплуатации Banner Sure Cross DXM1000-B Series доступна для бесплатного скачивания с нашего сайта. Этот мануал поможет вам лучше понять функционал продукта и его возможности. Скачайте его сегодня с manualshive.com и начните использовать вашу систему на максимуме ее возможностей.

Поделиться
Скачать
background image

Make note of the IMEI number of the cellular modem and the ICCID number of the SIM card. The numbers can be
found on the cellular modem and the SIM card or SIM card carrier. You will need the SIM number to associate a
wireless plan to this SIM card.

2. Orient the cellular modem according to the pin layout and verify the pins are properly aligned. Firmly press the

modem into the 24-pin socket.
•

For the DXM100, DXM150, and DXM1000 models—Install the cellular modem board onto the processor board as

shown. Use the diagram below to verify the orientation is correct.

•

For the DXM700 models—Install the cellular modem board onto the base board as shown. Use the diagram

below to verify the orientation is correct.

3. Attach the antenna cable between the cellular modem board to the base board as shown.
4. Install the external cellular antenna on the DXM's SMA connector located next to the antenna cable.

Figure 20. DXM100, 150, and 1000

Modem

*SIM card is located on the underside of installed modem

SIM card* 

location

Antenna Cable

Figure 21. DXM700

Modem

*SIM card is located on the underside of installed modem

Antenna Cable

SIM card* 

location

Install the Cellular Modem (DXM1200 Models)

Follow these steps to install the cellular modem and antenna cable.

Important:

•

Electrostatic discharge (ESD) sensitive device

•

ESD can damage the device. Damage from inappropriate handling is not covered by warranty.

•

Use proper handling procedures to prevent ESD damage. Proper handling procedures include

leaving devices in their anti-static packaging until ready for use; wearing anti-static wrist straps; and

assembling units on a grounded, static-dissipative surface.

Before you activate your cellular plan, verify you have one of the following cellular modem kits.

Table 19: Cellular modem kit models

Cellular Kit Model

Kit Description

SXI-LTE-001

Verizon LTE

 cellular modem using Telit LE910 modem kit (Verizon part number SENSX002). Includes a cellular modem, SIM

card, antenna, and antenna cable. The SIM card is specific to the LTE technology and cannot be used in other cellular
modems. Requires a LTE Verizon cellular wireless plan attached to the ICCID (SIM card) number and IMEI (International
Mobile Equipment Identity) number.
Cellular plans can be purchased through 

secure.bannercelldata.com

.

SXI-CATM1VZW-001

Verizon CAT M1

 cellular modem using Telit ME910 modem kit (Verizon part number SXIM1V). Includes a cellular modem, SIM

card, and internal adhesive antenna. The SIM card is specific to the CATM1 technology and cannot be used in other cellular
modems. Requires a LTE Verizon cellular wireless plan attached to the ICCID (SIM card) number and IMEI (International
Mobile Equipment Identity) number.
Cellular plans can be purchased through 

secure.bannercelldata.com

.

SXI-CATM1ATT-001

ATT CAT M1

 cellular modem using Telit ME910 model kit. (ATT part number SXIM1A). Includes a cellular modem, SIM card.

and internal adhesive antenna. The SIM card is specific to the CATM1 technology and cannot be used in other cellular
modems. Requires a LTE AT&T cellular wireless plan attached to the ICCID (SIM card) number and IMEI (International Mobile
Equipment Identity) number.
Cellular plans can be purchased through 

secure.bannercelldata.com

.

Sure Cross

®

 DXM700-Bx Wireless Controller

 

 

34

www.bannerengineering.com - Tel: + 1 888 373 6767

 

Содержание Sure Cross DXM1000-B Series










































































Отзывы:

Нет отзывов

Похожие инструкции для Sure Cross DXM1000-B Series

Nelson 800 Series Application Manual preview
800 Series
Бренд: Nelson Страницы: 19
C-TEC 800 Series Installation Instructions preview
800 Series
Бренд: C-TEC Страницы: 2
Samson 3253 Translation Of Original Instructions preview
3253
Бренд: Samson Страницы: 92
Jafar 2901 Operation And Maintenance Manual preview
2901
Бренд: Jafar Страницы: 10
Lawler 61 Series Installation & Maintenance Manual preview
61 Series
Бренд: Lawler Страницы: 4
Hama 11412 Operating Instruction preview
11412
Бренд: Hama Страницы: 46
Galcon 61 Series Installation And Operating Instructions Manual preview
61 Series
Бренд: Galcon Страницы: 35
Keba Kemro K2 Project Engineering Manual preview
Kemro K2
Бренд: Keba Страницы: 16
KEB COMBIVERT F5 Safety Manual preview
COMBIVERT F5
Бренд: KEB Страницы: 16
L-Acoustics LA8 Product Information preview
LA8
Бренд: L-Acoustics Страницы: 20
YASKAWA U1000 iQpump Drive User Manual preview
U1000 iQpump Drive
Бренд: YASKAWA Страницы: 426
YASKAWA Motoman DX200 Safety Notes preview
Motoman DX200
Бренд: YASKAWA Страницы: 26
YASKAWA motoman NX100 Instructions Manual preview
motoman NX100
Бренд: YASKAWA Страницы: 210
YASKAWA Z1000 CIMR-ZU*A Series User Manual preview
Z1000 CIMR-ZU*A Series
Бренд: YASKAWA Страницы: 400
YASKAWA Z1000 CIMR-ZU*A Series Technical Manual preview
Z1000 CIMR-ZU*A Series
Бренд: YASKAWA Страницы: 466
Zeta Premier MX-16 Installation And Commissioning Manual preview
Premier MX-16
Бренд: Zeta Страницы: 44
Zodiac SIROCCO2 Spare Parts/Accessories Instructions Manual preview
SIROCCO2
Бренд: Zodiac Страницы: 12
National Instruments 73 Series Getting Started preview
73 Series
Бренд: National Instruments Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды