Banner SSA-EB1PL 0D Series, Инструкция по эксплуатации

Страница: 16 / 20

4.2 Brackets
SSA-MBK-EEC1
• Single 30 mm hole
• 8 gauge steel, black finish (powder coat)
• Front surface for customer applied labels
80
85
60
45
B
A
SSA-MBK-EEC2
• Two 30 mm holes
• 8 gauge steel, black finish (powder coat)
• Front surface for customer applied labels
170
60
45
80
B
A
SSA-MBK-EEC3
• Three 30 mm holes
• 8 gauge steel, black finish (powder coat)
• Front surface for customer applied labels
255
B
A
80
60
45
The SSA-MBK-EECx brackets offer:
• Horizontal and vertical (post) mounting
• Interchangeable positions of mounted devices (e.g. OTB/STB/VTB, E-Stop, K50s)
Hole size: A = ø 7 , B = ø 30
4.3 Adapters and Other Accessories
Model Description
SI-RFA-TS SI-RF T-adapter for series connection, 4 pin to 8 pin to 4 pin
SI-RFA-TK SI-RF T-adapter for connection of the reset button, 8 pin to 4 pin to 8 pin
SI-RFA-P SI-RF Termination plug M12
SI-RFA-DM1 SI-RF Diagnostic Module with 8 digital outputs and 1 diagnostic circuit
Interfaces: IO-Link, USB 2.0
SSA-EB1P-ECWC FDA-grade silicone cover
4.4 Safety Controllers
Safety Controllers provide a fully configurable, software-based safety logic solution for monitoring safety and non-safety
devices. For additional models and XS26 expansion modules, see instruction manual p/n 174868 (XS/SC26-2).
Non-Expandable Models Expandable Models Description
SC26-2 XS26-2 26 convertible I/O and 2 Redundant Solid State Safety Outputs
SC26-2d XS26-2d 26 convertible I/O and 2 Redundant Solid State Safety Outputs with Display
SC26-2e XS26-2e 26 convertible I/O and 2 Redundant Solid State Safety Outputs with Ethernet
SC26-2de XS26-2de 26 convertible I/O and 2 Redundant Solid State Safety Outputs with Display and Ethernet
SC10-2roe 10 Inputs, 2 redundant relay safety outputs (3 contacts each) (ISD compatible)
SSA-EB1PLx-0Dx Series Lighted Emergency Stop Button with ISD
16 www.bannerengineering.com - Tel: + 1 888 373 6767