3 Enabling Communications
3.1 Setting Up Ethernet Communications
Configure both the PC and the sensor using the following instructions.
3.1.1 Windows XP
1. Open Network Properties on the PC (right-click on the Network Neighborhood icon).
2. On the Local Area Connection, right-click on Properties.
3. In the dialog, click on Internet Protocol (TCP/IP) and click the Properties button.
4. In the Internet Protocol (TCP/IP) Properties dialog, select Use the following IP address and make sure
that the IP address is 192.168.0.2, and the subnet mask is 255.255.255.0.
3.1.2 Windows 7
1. Open Network Connections by clicking on the Start button, then selecting the Control Panel followed by Network
and Internet, and clicking Manage network connections.
2. Right-click the connection you want to change, then click Properties. If you are prompted for an administrator
password or confirmation, type the password or provide confirmation.
3. In the Networking dialog, click on Internet Protocol Version 4(TCP/IPv4) and click the Properties button.
iVu Plus BCR Communications
8
