Banner EZ-SCREEN SLS, Инструкция по эксплуатации

Страница: 33 / 114

May 22, 2023
EZ-SCREEN SLS Safety Light Curtain Instruction Manual
33
•
•
•
•
•
•
•
•
•
•
•
•
•
•
NOTE:
EZ-SCREEN sensor brackets are designed to mount directly to MSA Series stands, using the
hardware supplied with the stands (see " Appropriate Applications and Limitations " on page 11 )
See "Dimensions" on page 14 for mounting bracket dimensions
Verify that:
The emitter and receiver are directly opposite each other
Nothing is interrupting the defined area
The defined area is the same distance from a common reference plane for each sensor
The emitter and receiver are in the same plane and are level/plumb and square to each other (vertical, horizontal, or
inclined at the same angle, and not tilted front-to-back or side-to-side)
Angled or Horizontal Installations – verify that:
Distance X at the emitter and receiver are equal
Distance Y at the emitter and receiver are equal
Distance Z at the emitter and receiver are equal from parallel surfaces
Vertical face (the window) is level/plumb
Defined area is square. Check diagonal measurements if possible. See Vertical Installations.
Level Surface
X X
Emitter Receiver
level
level
Y Y Z
Z
Vertical Installations – verify that:
Distance X at the emitter and receiver are equal
Both sensors are level/plumb (check both the side and face)
Defined area is square. Check diagonal measurements if possible (Diagonal A = Diagonal B).
Sensor Mounting and Mechanical Alignment
5.4
Incorrect Sensor Alignment Figure 14.
For angled or horizontal installations
Figure 15.
© Banner Engineering Corp.