Banner DF-G3 Series Скачать руководство пользователя | Manualshive

Страница: 33 / 33

background image

7 Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will

repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This

warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING

OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE

LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR

SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR

WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product

previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection

applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval

by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product

specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most

recent version of any documentation, refer to:

www.bannerengineering.com

For patent information, see

www.bannerengineering.com/patents

DF-G3 Long Range Expert Dual Display Fiber Amplifier with Dual Discrete Outputs and IO Link

www.bannerengineering.com - Tel: + 1 888 373 6767

33

«
...
31
32
33

Содержание DF-G3 Series


































Отзывы:

Нет отзывов

Похожие инструкции для DF-G3 Series

Бренд: Xtant Страницы: 2

Бренд: b2audio Страницы: 11

Бренд: A&R Страницы: 16

Sound Wave 115S

Бренд: Ibanez Страницы: 2

Бренд: NAD Страницы: 18

Бренд: NAD Страницы: 2

Бренд: NAD Страницы: 2

Бренд: NAD Страницы: 2

Бренд: NAD Страницы: 16

Бренд: NAD Страницы: 2

Бренд: NAD Страницы: 12

Бренд: NAD Страницы: 39

Бренд: NAD Страницы: 4

Бренд: NAD Страницы: 4

Бренд: NAD Страницы: 10

Бренд: NAD Страницы: 3

Бренд: NAD Страницы: 2

Бренд: NAD Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды