Banner A-GAGE High-Resolution MINI-ARRAY MAHE6A Скачать руководство пользователя страница 39

Страница: 39 / 39

9 Product Support and Maintenance

9.1 Contact Us

Banner Engineering Corp. headquarters is located at:

9714 Tenth Avenue North

Minneapolis, MN 55441, USA

Phone: + 1 888 373 6767

For worldwide locations and local representatives, visit

www.bannerengineering.com

9.2 Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following

the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which,

at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not

cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED

(INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO

EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY

EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL

DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT,

WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR

OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any

obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or

improper application or installation of this product or use of the product for personal protection applications when the

product is identified as not intended for such purposes will void the product warranty. Any modifications to this product

without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in

this document are subject to change; Banner reserves the right to modify product specifications or update documentation

at any time. Specifications and product information in English supersede that which is provided in any other language. For

the most recent version of any documentation, refer to:

www.bannerengineering.com

For patent information, see

www.bannerengineering.com/patents

A-GAGE

High-Resolution MINI-ARRAY

www.bannerengineering.com - Tel: + 1 888 373 6767

Содержание A-GAGE High-Resolution MINI-ARRAY MAHE6A







































Результаты поиска

Содержание A-GAGE High-Resolution MINI-ARRAY MAHE6A

Отзывы:

Banner A-GAGE High-Resolution MINI-ARRAY MAHE6A, Инструкция по эксплуатации, Страница: 39 / 39

Результаты поиска

Содержание A-GAGE High-Resolution MINI-ARRAY MAHE6A

Отзывы: